Parallel Conventional Lathe Machine SHCW-6280B(7000mm) with Max.Swing over bed 800mm

*Parallel Conventional Lathe Machine *Swing over bed(mm) 800 *Swing over carriage(mm) 520

Parallel Conventional Lathe Machine
These lathes are suitable mainly for turning internal and external cylindrical , Conical and other swing surface as well as various metric ,inch, module and diametric pitch threads.They can also be used for broaching oil grooves and keyways.There are also following features:
1. The side wall of bed is constructed with double-rib Plates,and the shape of internal ribs is of box type and bevel ribs combination.The rigidity is higher than that fo ordinary lathes. The precision is stable. And these lathes can carry out strong force cutting.
2.On apron, there is a device ,operated by a single lever, used for rapid traverse of the carriage . Spindle’s braking and rotating direction change is controlled by hydraulic system, or by hand operation, all to user’s choice.
3. The saddle guide way is glued by “TSF” soft belt wear resisting materials.
4. On user’s demand, we can equip the lathe with automatic feeding mechanism .The top slide can be used independently for turning of short cone. In combination with longitudinal feeding , it can also turn long taper surface.
Model	SHCW-6280B(7000mm)
Swing over bed(mm)	800
Swing over carriage(mm)	520
Maximum length of workpiece(mm)	7000
Maximum turning length(mm)	6850
Swing over gap(mm)	1000
Effective width of gap(mm)	300
Pan of guideway(mm)	550
Spindle nose	C11
Spindle bore(mm)	100
Taper hole of spindle	1:20/120
Range of spindle speeds(r/min)	6-800
Number of spindle speeds	18
Longitudinal and cross(r/min)	64;0.1-24.32
Cross-to-long longitudinal feed rate	1.0/2.0
Screw pitch of leadscrew(mm)	12
Number and range of metric thread(mm)	50;1-240
Number and range of inch thread	26;14-1
Number and range of module thread(mm)	53;0.5-120
Number and range of diametrical pitch thread	24;28-1
Rapid traverse speed of carriage(mm/min)	4000
Max.travel of cross slide(mm)	540
Max.travel of top slide(mm)	200
Section of tool shank(mm)	32
Diameter of tailstock quill(mm)	100
Travel of tailstock quill(mm)	250
Taper hole of tailstock quill	Morse 5
Main motor power(kw)	11
Machine mass(kg)	9000
Length(mm)	9275
Width(mm)	1473
Height(mm)	1622

Parallel Conventional Lathe Machine SHCW-6280B(7000mm) with Max.Swing over bed 800mm